Advertisement
Available languages
Available languages
1
4.
En
Ko
Th
Vi
Connecting the Power
5
Cord
Ms
1
Specifying the Basic
6
Settings
When you turn on the machine for the first time, the Setup
Guide appears on the operation panel. Perform the initial
machine setup by following the on-screen instructions.
Depending on your model, the items available for selection
and the procedure for making choices may differ from
those shown in this document. Proceed as directed in the
screens shown.
Operation panel
4
5
6
Rear
2
4
7
8
1.
Select the language, the country or region,
and then the time zone.
2.
Set the current date/time.
Specifying the Security
7
Settings
To prevent unauthorized access to the machine, set access
restrictions for Remote UI.
What is Remote UI?
Remote UI allows you to use your computer's Web
browser to check the machine's operating status
and change settings.
1.
To use the Remote UI, select <Yes>.
• To continue without using the Remote UI, select
<No> and proceed to step
• When <A Remote UI Access PIN must be configured...>
appears, proceed to step 5.
2.
To use System Manager mode, select <Yes>.
• Set the System Manager ID and PIN so that you
can configure the settings for extended functions
and the management of access privileges, etc.
• To continue without using System Manager mode,
select <No> and proceed to step 5.
3.
Set the System Manager ID.
Enter any number and then select <Apply>.
4.
Set the System Manager PIN.
• Enter any number and then select <Apply>.
• Re-enter the same PIN on the next screen as
confirmation and select <Apply>.
5.
To use General User mode, select <Yes>.
• Set the PIN to be used by general users to access
the Remote UI.
• To continue without using General User mode,
select <No> and proceed to step
6.
Set the Remote UI Access PIN.
• Enter any number and then select <Apply>.
• Re-enter the same PIN on the next screen as
confirmation and select <Apply>.
9
10
.
8
8
.
Advertisement
