Opening The Server; Before Opening The Server; To Open The Front Bezel; To Remove The Front Bezel - Acer Altos G520 series User Manual

Opening the server

Caution! Before you proceed, make sure that you have turned off
your system and all peripherals connected to it. Read the
"Preinstallation instructions" on page 37.
You need to open the server before you can install additional
components. The front bezel and left side panel are removable to
allow access to the system's internal components. Refer to the
following sections for instructions.

Before opening the server

Before opening the server, observe the following precautions:
1 Turn off the system and all the peripherals connected to it.
2 Unplug all cables from the power outlets.
3 Place the system unit on a flat, stable surface.
Note: The illustrations used in this section show the Altos G520
server chassis.

To open the front bezel

A security lock secures the front bezel to protect your system unit
against unauthorized access.
To open the front bezel:
1 Insert the key into the lock and turn it clockwise until it points to
the unlocked icon
2 Open the front bezel.

To remove the front bezel

The front bezel is attached to the chassis by screwless hinges.
To remove the front bezel:
1 Unlock the bezel with the key (when necessary).
.
39