Acer Altos G520 series User Manual page 156

146
5 Extend the middle sliding piece of each mounting rail forward
until it clicks.
6 Install the server tray into the rack by first carefully aligning the
inner rails with the fully extended middle mounting rails on the
rack. Press the release latch on both sides of the server and slide
the server tray.
Caution! To avoid personal injury, care should be taken when
pressing the component rail release latches and sliding the
component into the rack.
7 Place the system on the server tray with the removeable left panel
facing up.
8 Secure the system by tightening the two tooless screws at the back
of the server tray to back of the server.
9 Insert the power, peripheral and networking cables into the
appropriate ports. Refer to "Connecting peripherals" on page 24
for detailed instructions.
Appendix C: Altos G520 Rack Installation Guide