To Install A Hard Disk Into The Cage - Acer Altos G520 series User Manual

50

To install a hard disk into the cage

1 Remove the HDD cable cage from the chassis. Refer to the
instructions in the preceding section.
2 Remove the four screws that secure a previously installed hard disk
to the cage then pull the HDD out.
3 Install a new hard disk into the cage then secure it with the four
screws you removed in the previous step.
Note : Make sure the hard disk is tightened by screws on the cage.
4 Reinstall the HDD cable cage to the chassis. Refer to the
instructions in the subsequent section.
3 Upgrading the system