92
Parameter
Bootup
Num-Lock
PS/2 Mouse
Support
POST Error
pause
Hit 'F2' Message
Display
Scan User Flash
Area
Boot Device Priority
The Boot Device Priority submenu lets you specify the boot search
sequence during the POST process.
Description
Sets the power on state for Numlock.
Enable this parameter if you intend to use
a mouse or trackball with a PS/2 interface.
When this item is enabled you will be
prompted when an error is detected dur-
ing boot up. If disabled, the system will
boot with no intervention, if possible.
Displays "Press 'F2' to run Setup" during
POST.
Allows BIOS to scan Flash ROM for user
binaries.
4 BIOS setup
Option
Off
On
Disabled
Enabled
Auto
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled