MP3 400 i.e.
Conceptual diagrams
Specification
General characteristics
Lubrication circuit is split into two sections:
- High pressure
- Low pressure
The high pressure section includes all components located on the engine crankcase, while the low
pressure section only refers to the thermal unit.
The trochoidal pump is installed into the sump and is controlled through a couple of gears.
To guarantee the integrity of the pump, a pre-filter is installed.
The pre-filter is of the screw-in type and the plug serves at the same time as an engine oil drain plug.
PRINCIPLE DIAGRAM
A
B
C
D
E
F
G
H
L
M
N
O
Desc./Quantity
Camshaft
Cylinder-head plane
Cylinder-crankcase plane
Water pump impeller
Minimum oil pressure sensor
Oil filter cartridge
To the oil sump
By-pass valve
Oil pump
Mesh pre-filter
Crankshaft
Connecting rod
Engine
ENG - 95