PIAGGIO MP3 400 i.e. Service Manual page 268

Suspensions
Fit the pinion and align the reference on the pinion
teeth with the reference indicated on the second
slot of the toothed sector.
Grease the pinion and the toothed sector with spe-
cific grease.
Refit the toothed sector spacer.
Recommended products
MONTBLANC MOLYBDENUM GREASE MON-
TBLANC MOLYBDENUM GREASE
Molybdenum disulphide grease
Lubricate the interference areas, match the crank-
case halves with slight hits of a mallet to get them
into contact.
Place the flexible transmission supporting bracket,
refit the four screws, screw them to the prescribed
torque.
Locking torques (N*m)
Geared motor crankcase halves coupling
screws 11 ÷ 13
Refit the electric motor; check the position is cor-
rect by means of the reference indicated during
removal.
The motor should be so positioned that it does not
protrude from the reduction unit mould, see figure.
Tighten the screws to the prescribed torque.
Locking torques (N*m)
Electric motor coupling screws 11 ÷ 13
SUSP - 22
MP3 400 i.e.