PIAGGIO MP3 400 i.e. Service Manual page 267

MP3 400 i.e.
Suspensions
Unscrew the two pad pin screws, remove the pads
with the spring.
When refitting, tighten the two screws to the pre-
scribed torque and use Threadlock.
When refitting, adjust the cable properly so that the
switch is pushed when the system is unlocked.
Refit the spring/toothed sector unit, hold the crank-
case in a perfectly horizontal and stable position,
place the spring/toothed sector unit keeping it per-
fectly perpendicular to the bearing already fitted on
the crankcase; if necessary, slightly hit the unit
shaft end with a mallet and protect the thread by
screwing in a nut.
SUSP - 21