Seat; Rear Handlebar Cover - PIAGGIO MP3 400 i.e. Service Manual

Chassis
This section è is devoted to the operations that can be carried out on the vehicle's bodywork.

Seat

- Raise the saddle.
- Undo the screw shown in the figure, remove the
cover and disconnect the rider presence sensor
connector.
- Remove the three fixing screws shown in the fig-
ure.

Rear handlebar cover

After removing the front part of the handlebar cov-
er, access the two screws fixing the rear part to the
handlebar, as indicated in the photograph.
CHAS - 2
MP3 400 i.e.