Engine from vehicle
- Remove the spark plug caps.
- Remove the coolant temperature sensor con-
nector indicated in the photo.
- Remove the throttle cables from the throttle body
by undoing the nuts indicated in the photograph.
- Remove the negative terminal cable from the
starter motor.
- Remove the positive terminal cable from the
starter motor as shown in the photograph.
- Remove the engine ground lead.
- Disconnect the connectors from the flywheel wir-
ing as shown in the photo.
- Remove the cable from the retaining clip on the
flywheel cover.
ENG VE - 4
MP3 400 i.e.