Table of Contents
Advertisement
2.3
Rear Panel Connectors
Refer to Figure 2-2 and Table 2-2 for description of the Rear Panel connectors.
12
9
11
10
No.
Connection
1
AC Input Connector
2
Ground Stud
3
DC output bus-bar /
Connector
4
Remote sense connector
5
Reset button
6
Paralleling Connectors
7
LAN Connector +
Indicators
8
Serial In connector
9
Serial Out connector
10
USB Connector
11
Isolated control and signals
12
Optional Interface
8
6
5
4
7
Figure 2-2: Rear panel connectors
Description
Connector type: Phoenix contact P/N: PC 5/ 4-G-7,62
Functional Ground connection M4x8 Stud
Bus-bars for 10V to 100V models.
Phoenix contact P/N: IPC 5/ 4-GF-7,62 for 150V to 600V
models.
Connector for remote sensing connections. Connect to the
load for regulation of the load voltage and compensation of
load wire drop.
Set default Power Supply settings.
Master/Slave connectors, mini I/O type.
LAN interface connector, RJ-45 type + LXI indicators.
Connector type: UDE P/N: 26-31024KB91-1.
RJ-45 type connector, used for connecting power supplies to
RS232 or RS485 port of a computer for remote control
purposes. When using several power supplies in a power
system, the first unit Remote-In is connected to the computer
and the remaining units are chained, Remote-In to Remote-
Out. Connector type: Molex 95540-2881.
RJ-45 type connector, used for chaining power supplies
to/from a serial communication bus. Connector type: Molex
95540-2881.
USB interface connector, type B. Connector type: SAMTEC
P/N: USBR-B-S-F-O-TH.
Isolated analog Control and monitoring signals, isolated from
the output potential. Connector type: WE P/N:
618026325223.
Position for optional communication interface.
Table 2-2: Front panel controls and indicators
2
3
27
1
Advertisement
Table of Contents
