Figure A-2: Hyperterminal Screen For Modem Connection; Figure A-3: Ekomini Main Menu - EMS EkoMini Operator's Manual

4. For remote connection via modem, enter the number you wish to dial and choose
the "Standard Modem" or the particular modem needed as shown in Figure A-3.

Figure A-2: HyperTerminal Screen for Modem Connection

5. In the next window, choose "Dial". The modem should dial and connect to the
repeater. The repeater will respond with "Welcome to the Remote System". Press
the 'enter' key, and then the default password of '11111'. Again press the 'enter'
key. Then, the screen should look similar to Figure A-3.
EMS Wireless EkoMini Manual
Figure A-3: EkoMini
43
TM
Main Menu
EMS Wireless