Switch 5: Cdma Modulation; Table 3: Ekomini 1.9-15 Band Selection; Table 4: Ekomini 1.9-5 Band Selection; Table 5: Cdma Switch Configuration - EMS EkoMini Operator's Manual

3.3.2.3 EkoMini 1.9 – 15: 1900 MHz 15 MHz Bandwidth (Bands A, B, or C) Model:
To properly set the PCS band, see Table 3 below.
Band Selection
A
B
C
Error – Fault indicated
by the DC LED indicator
flashing green.
3.3.2.4 EkoMini 1.9 – 5: 1900 MHz 5 MHz Bandwidth (Bands D, E, or F) Model:
To properly set the PCS band, see Table 4 below.
Band Selection
D
E
F
Error – Fault indicated
by the DC LED indicator
flashing green.

3.3.3 Switch 5: CDMA Modulation

A different calibration table is needed for CDMA operation. Turn on switch 5 for CDMA
use. See Section 5.4 for more detailed technical information.
CDMA
All other
EMS Wireless EkoMini Manual

Table 3: EkoMini 1.9-15 Band Selection

Switch 3 Position
On
On
Off
Off

Table 4: EkoMini 1.9-5 Band Selection

Switch 3 Position
On
On
Off
Off

Table 5: CDMA Switch Configuration

Modulation
19
Switch 4 Position
On
Off
On
Off
Switch 4 Position
On
Off
On
Off
Switch 5 Position
On
Off
EMS Wireless