Remote Alarming And Detailed Software Commands; Remote Log-In; Remote Alarm Set-Up; Figure 9: Log-In Screen - EMS EkoMini Operator's Manual

4.0 Remote Alarming and Detailed Software Commands

4.1 Remote Log-in

TM
The EkoMini remote alarming functions can be accessed when the optional factory
installed modem and software are included.
Any standard communications terminal software program may be used to log in to the
repeater. HyperTerminal, a communications accessory program that is part of
Microsoft Windows, is used in this description.
Appendix A details the HyperTerminal configuration steps necessary to log in to the
repeater. Once login has been accomplished, the computer screen should look similar
to Figure 9.
DL Peak RF Output, dBm
Uplink Gain Offset Relative to
DL, dB
A factory default password is pre-programmed into the unit as 11111. The user may
change this in the program mode of operation.
password.

4.2 Remote Alarm Set-up:

EMS Wireless EkoMini Manual

Figure 9: Log-in Screen

23
System Date/Time
Serial Number
Model Number
Software Version
DL Output Power Level, dBm
UL Output Power Level, dBm
Alarm Status
There is also a factory access
EMS Wireless