3.3.2 Switches 3 and 4:
Selection (1900 MHz Models)
The function of these switches depends on the frequency band of operation. Please
note that this section is a brief summary so these switches can be set quickly. Much
more detail about Switches 3 and 4 can be found in Section 5 of this manual.
Follow the guidelines in the chart below:
If Your Repeater Model is:
800 MHz Cellular A Band Series
(EkoMini 8-11-CA*-*)
800 MHz Cellular B Band Series
(EkoMini8-14CB*-*)
All
other
(Cellular Full Band, SMR, Public
Safety Band, etc.)
EkoMini 1.9 – 15: 1900 MHz 15
MHz
EkoMini 1.9 – 5:
MHz
EMS Wireless EkoMini Manual
Bandpass Filter Position (800 MHz Models), Band
800
MHz
Models
1900 MHz 5
16
Go to Section:
3.3.2.1
3.3.2.2
Skip to Section 3.3.3
3.3.2.3
3.3.2.4
EMS Wireless