Example Program - High End Systems SolaFrame Theatre User Manual

Example Program

Example:
A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master unit can start 3
different Slave units, which run 3 different programs. The Master unit sends the 3 program parts in a
continuous loop.
The Slave unit receives data from the Master unit according to the group which the Slave unit was
assigned to. If e.g. a Slave unit is set to "Slave 1" in the menu "Set to Slave", the Master unit sends
"Auto Program Part 1" to the Slave unit. If set to "Slave 2" ,the Slave unit receives "Auto Program
Part 2".
To start an Auto Program please proceed as follows:
1. Slave-Setting
a) Select "Function Mode" by turning the encoder.
b) Press the Enter button to confirm.
c) Select "Set to slave" by turning the encoder.
d) Press the Enter button to confirm
e) Turn the encoder to select "Slave 1", "Slave 2" or "Slave 3"
f) Press the Enter button to confirm.
g) Press the MODE/ESC button in order to return to the main menu.
SolaFrame Theatre v1.2.5 43 User Manual