FUTABA Mega Tech 3PK Instruction Manual page 40

Throttle EXP/TH-EXP (Throttle system)
This function makes throttle trigger high side and brake side direction servo opera-
tion quicker or milder. It has no effect on the servo maximum operation amount.
For the high side, selection from among three kinds of curves (EXP/VTR/CRV) is
also possible.
Advice
When the course conditions are good and there is no sense of torque at the power unit,
set each curve to the + side (quick side). When the road surface is slippery and the
drive wheels do not grip it, set each curve to the - minus (mild) side.
Calling the setup screen
* Calling from menu screen
(Initial screen)
Use the
button to select the
MENU
menu screen.
Press the
MENU SELECT
Use the
button to select the
function.
Press the
* When the direct call button is set,
the setup screen is also called by the
following method:
(Initial screen)
Press the
DIRECT SEL
Press the button set
at this function.
Adjustment method for EXP curve
(Preparation)
- Select "EXP" at setup item "FWD-TYP".
- Select setup item "RATE" and make the following ad-
justments:
1 Forward side adjustment
Use the (+) button to adjust the + side when you
want to quicken the rise and use the (-) button to
adjust the - side when you want to make the rise
milder.
2 Brake side adjustment
Select "BRK-EXP" by pressing the (DN) button
twice, and use the (+) button to adjust the + side
40
or
button.
or
button.
button.
Use the or button to
select the setup item.
* blinks at the current
setup item.
Curve selection
First, select the type of forward side
curve at the "FWD-TYP" item. The
setup item (screen) varies with the
type of curve. The figure at the bottom
left is the EXP curve setup screen.
Setup items
RATE : Forward side rate
FWD-TYP : Forward side curve selection
BRK-EXP : Brake side rate
Adjustment range
RATE : -100 ~ 0 ~ +100%
FWD-TYP : EXP, VTR, CRV
BRK-EXP : -100 ~ 0 ~ +100%
Adjustment buttons
- Use the (+) and (-) buttons to make
adjustments.
- Return to the initial value by pressing
the (+) and (-) buttons simultaneously
(approx. 1 sec).
Setup item switching
0 Use the (DN) or (UP) button to
switch the setup item.