Operation - FUTABA Mega Tech 3PK Instruction Manual

Steering Speed/ST-SPEED (Steering system)
Quick steering operation will cause momentary understeering, loss of speed, or spin-
ning. This function is effective in such cases.
Understeering

Operation

- This function limits the maximum speed of
the steering servo. (Delay function)
- The steering speed when the steering wheel
is operated (TURN direction) and returned
(RETN direction) can be independently set.
- If the steering wheel is turned
slower than the set speed, the steer-
ing servo is not affected.
Setting example (Steering servo: S9402) . . . (Setting criteria)
- Onroad TURN side: Approx. 50~80% RETN side: Approx. 60~100%
- Offroad TURN side: Approx. 70~100% RETN side: Approx. 80~100%
Calling the setup screen
* Calling from menu screen
(Initial screen)
Use the
button to select the
MENU
menu screen.
Press the
MENU SELECT
Use the
button to select the
function.
Press the
* When the direct call button is set,
the setup screen is also called by the
following method:
(Initial screen)
Press the
DIRECT SEL
Press the button set
at this function.
38
Steering speed not set
or
button.
or
button.
button.
Spin
TURN direction
Turning speed adjustment range
(Approx. 1.5 to 0.1 secs)
ス
テ
ィ
ッ
ク
操
作
Use the or button to
select the setup item.
* blinks at the current
setup item.
Smooth cornering
Steering speed set
"TURN"方向
操作時のスピード可変範囲
（約1.5∼0.1秒）
RETN direction
"RETN"方向
Return speed adjust-
戻りのスピード可変範囲
（約1.5∼0.1秒）
ment range (Approx. 1.5
to 0.1 secs)
時間
Time
Setup item
TURN: TURN direction
RETURN: RETURN direction
Adjustment range
1~100% (each direction)
Adjustment buttons
- Use the (+) and (-) buttons to make
adjustments.
- Return to the initial value by pressing
the (+) and (-) buttons simultaneously
(approx. 1 sec).