FUTABA Mega Tech 3PK Instruction Manual page 25

Changing wheel position
1. Connect the wheel unit con-
nector through the offset
adapter. Install the adapter
using four 2.5mm hex bolts at-
tached.
Modifying for left-hand use
1. Remove the wheel back cover
using 2.5mm hex wrench.
2. Push the wheel unit connector
in the opposite side.
2. Reinstall the wheel unit,
wheel unit cover, wheel, and
wheel cap in same position
as they were removed.
3. In opposite side, connect the
wheel unit connector and rein-
stall the wheel unit, wheel unit
cover, wheel, and wheel cap
in same position as they were
removed.
25