FUTABA Mega Tech 3PK Instruction Manual page 37

Steering EXP/ST-EXP (Steering system)
This function is used to change the sensitivity of the steering servo around the neutral
position. It has no effect on the maximum servo travel.
Racers Tip
When the setting is not determined, or the characteristics of
the model are unknown, start with 0%. (When EXP is set to
0%, servo movement is linear.)
Calling the setup screen
* Calling from menu screen
(Initial screen)
Use the
button to select the
MENU
menu screen.
Press the
MENU SELECT
Use the
button to select the
function.
Press the button.
* When the direct call button is set,
the setup screen is also called by the
following method:
(Initial screen)
Press the
DIRECT SEL
Press the button set
at this function.
Steering EXP adjustment
1 When you want to quicken steering operation,
use the (+) button to adjust the + side. When you
want to make steering operation milder, use the
(-) button to adjust the - side.
2 When ending adjustment, return to the initial
screen by pressing the (END) button 3 times.
(Quick)
Servo travel
サーボ動作量
+1%∼+100%
+1% ~ +100% (quick)
（クイック）
Setup item
RATE: Steering EXP rate
or
button.
or
button.
0%（ノーマル）
0% (normal)
ステアリング
Steering wheel travel
スティック
動作量
Vertical cursor moves in step with
steering wheel operation.
Adjustment range
-100~0~+100%
Adjustment buttons
- Use the (+) and (-) buttons to make
adjustments.
- Return to the initial value by pressing
the (+) and (-) buttons simultaneously
(approx. 1 sec).
(Mild)
Servo travel
サーボ動作量
0%（ノーマル） 0% (normal)
Steering wheel travel
-1%∼ -100%
-1% ~ -100% (mild)
（マイルド）
ステアリング
スティック
動作量
37