FUTABA Mega Tech 3PK Instruction Manual page 35

Calling the setup screen
* Calling from menu screen
(Initial screen)
Use the
button to select the
MENU
menu screen.
Press the
MENU SELECT
Use the
button to select the
function.
Press the button.
* When the direct call button is set,
the setup screen is also called by the
following method:
(Initial screen)
Press the
DIRECT SEL
Press the button set
at this function.
Steering wheel steering angle (EPA) adjustment
(Preparation)
- Before setup the steering wheel steering angle, set the
steering D/R dial (initial setup: DL1) to the maximum
steering angle position 100%.
- Select setup item "ST-LFT" and make the following
adjustments:
1 Steering (left side) adjustment
Turn the steering wheel fully to the left and use
the (+) and (-) buttons to adjust the steering
angle.
2 Steering (right side) adjustment
Turn the steering wheel fully to the right and use
the (+) and (-) buttons to adjust the steering
angle.
3 When adjusting the steering angle of another
channel immediately after this, see the adjust-
ment method for that channel. When ending ad-
justment, return to the initial screen by pressing
the (END) button three times.
Use the
select the setup item.
* blinks at the current
setup item.
or
button.
or
button.
or button to
Setup items
ST-LFT : Steering (left side)
ST-RGT : Steering (right side)
TH-FWD : Throttle (forward side)
TH-BRK : Throttle (brake side)
3C-UP : 3rd channel (up side)
3C-DW : 3rd channel (down side)
Adjustment range
0~120% (each channel, each direc-
tion)
Adjustment buttons
- Use the (+) and (-) buttons to make
adjustments.
- Return to the initial value by pressing
the (+) and (-) buttons simultaneously
(approx. 1 sec).
Setup item switching
- Use the (DN) and (UP) buttons to
switch the setup item.
- Others switch the setup item (direc-
tion) linked to the steering wheel.
100%
35