Set Data Backup; Display Switch - FUTABA Mega Tech 3PK Instruction Manual

When inserting and removing the data pack
Always turn off the transmitter power before removing or inserting the data pack.
Data pack initialization
When using the data pack, initialization is necessary so
that the data pack can be used with this transmitter. When
"INITIALIZE?" is displayed on the screen at power ON,
press the (+) button. This automatically initializes the data
pack. No further action is necessary.
When a data pack used with another model has been inserted, and initialization is
executed by pressing the (+) button when "INITIALIZE?" is displayed on the screen
at power ON, the old data is destroyed so the data pack can be used with the 3PK.
Data interchangeability with other models
Data is not interchangeable with 3PJsuper, 3VC, and other transmitters other than the
3PK.

Set data backup

The set data of each function (transmitter body and data pack) of the 3PK transmitter
is stored in a memory element that does not require a backup battery. Therefore, the
3PK transmitter can be used without paying attention to the backup battery life.

Display switch

If the display switch is turned on without turning on the power switch, transmitter
side data setup is possible without emitting radio waves.
Display switch
ON
WARNING
( ) Prohibited item
Never turn on the power switch while this
OFF
function is in use.
If the power switch is turned on, radio waves
will be emitted and interfere with
vehicles (boats) operating on the same band
(frequency) and is very dangerous.
MEMORY MODULE
INITIALIZE ?
YES > +
NO > -
21