Battery Replacement
While pressing this part.
For dry cell battery system
Load the eight batteries in accordance with the polarity markings on the battery
holder.
-Dry cell battery (x8)
For Ni-cad battery system
The Ni-cad battery is connected by a connector so that it can be removed when you
will not be using the transmitter for a long time, or when replacing a dead battery with
a spare battery.
- Always use an NT8F700B Ni-cad battery.
18
Battery cover
Ni-cad battery
NT8F700B
1. Slide the transmitter battery
cover in the arrow direction while
pressing the part shown in the
figure.
2. Replace the Ni-cad battery pack
or Dry cell batteries.
3. Slide the battery cover back onto
the transmitter.
Cover
Charging jack
(Interior)