Table of Contents
Advertisement
Flying using the App
Once you have downloaded the App (see page 13), turn on the aircraft and
the lights will flash rapidly for around 5 seconds.
Once they have stopped rapidly flashing, go to the settings in your chosen
smart device and search for the aircraft (KD-****).
Once you have discovered it, select connect and wait for the WiFi to fully
connect.
Open the PANTONMA app and select "MY DRONE". This will take you into
the live view on the camera and display on screen controls.
See Flight Instructions on page 10.
Note: Do not turn on the supplied remote control if you want to control the
aircraft using the App. If you want to fly using the controller, the App can
only be used for live view and photography, not controlling the aircraft.
Troubleshooting
Problem
1 The lights on the aircraft are
flashing but it does not
respond to the control
2 The aircraft blades turn but it
will not take off
3 The aircraft shakes in flight
4 The aircraft won't fly using the
App.
5 Camera not working in App
Cause
1. The aircraft and transmitter
are not connected.
2. Insufficient battery power.
1. Insufficient battery power.
2. The blades are distorted.
3. Take off button not pressed.
The blades are
damaged/distorted
1. Aircraft not connected to
App.
2. Connection not done in
correct order.
3. Main controller is turned on.
1. Aircraft not connected to
App.
2. Camera module has come
loose.
15 of 16
Solution
1. Repeat the connection
procedure.
2. Recharge the battery.
1. Recharge the battery.
2. Replace the blades.
3. Press the take off
button.
Replace the blades.
1. Reconnect using the
instructions on page 15
2. Reconnect using the
instructions on page 15
3. Aircraft can not fly on
App when main
controller is turned on.
Turn off controller,
reset aircraft, app and
WiFi to reconnect to
App
1. Reconnect using the
instructions on page 15
2. Check camera module
is firmly installed in
body of aircraft.
Hide quick links:
Advertisement
Table of Contents
