Table of Contents
Advertisement
Fitting Propeller Guards
It is recommended that until you are fully comfortable with the controls and
handling of the aircraft that you install the propeller guards. These will protect
the propellers and aircraft in the event of a crash or hard landing.
Propeller Installation
Insert the propeller over the motor spindle and use a screwdriver to
tighten the screw.
It is important for the correct blade to be placed on the correct
motor or the aircraft will not fly correctly. Each blade is marked with
an A or B to indicate which motor it corresponds to.
Place the propeller guard over the outside of
the propeller and attach it with the screw
provided.
The aircraft comes with a collision avoidance
system, but this will only function in Low
speed mode.
The white rotors are positioned at
the front, and the black at the rear.
8 of 16
Hide quick links:
Advertisement
Table of Contents
