Troubleshooting - ProFlight PFBD301 User Manual

WARNING:
• Always calibrate the drone before controlling using the APP.
• Ensure you understand the operating instructions provided before attempting to
fly.
• Android device operating system must be 5.0 or higher.
• If you experience problems with the image, the drone is either too far away or
there is too much interference in the area. Try moving to a place with less
interference.
•
Ensure all safety warnings in the front of the manual are adhered to.

TROUBLESHOOTING

Problem
1 The lights on the aircraft are
flashing but it does not
respond to the control
2 The aircraft blades turn but
it will not take off
3 The aircraft shakes in flight
4 The aircraft won't fly using
the App.
5 Camera not working in App
Cause
1. The aircraft and
transmitter are not
connected.
2. Insufficient battery power.
1. Insufficient battery power.
2. The blades are distorted.
3. Take off button not
pressed.
The blades are
damaged/distorted
1. Aircraft not connected to
App.
2. Connection not done in
correct order.
3. Main controller is turned
on.
1. Aircraft not connected to
App.
17
Solution
1. Repeat the
connection
procedure.
2. Recharge the
battery.
1. Recharge the
battery.
2. Replace the blades.
3. Press the take-off
button.
Replace the blades.
1. Aircraft cannot fly on
App when main
controller is turned
on. Turn off the
controller, reset
aircraft, app and WiFi
to reconnect to App
1. Reconnect using the
instructions on page
14