Table of Contents
Advertisement
Headless Flight
The aircraft can be made
to fly in Headless Flight
by pressing the headless
flight button. This will
make the aircraft fly
without a front or rear.
It will fly in the orientation of the pilot. If you move the right joystick right, the
aircraft will fly right. Move the joystick left and it will fly left. Move the
joystick forwards and the aircraft will fly away from you and pull it back to
make it fly towards you. It does not matter which direction the drone is facing
in headless mode. To calibrate the aircraft for headless flight, place it on a flat
surface with the front facing away from the operator. Then press the Headless
function button as labelled on the diagram above.
Troubleshooting
Problem
1
The lights on the
aircraft are flashing but
it does not respond to
the control
2
The aircraft blades turn
but it will not take off
3
The aircraft shakes in
flight
Cause
1. The aircraft and
transmitter are not
connected.
2. Insufficient battery
power.
1. Insufficient battery
power.
2. The blades are
distorted.
.
The blades are
damaged/distorted
11 of 12
Solution
1. Repeat the
connection
procedure.
2. Recharge the
battery.
1. Recharge the
battery.
2. Replace the
blades.
Replace the blades.
Advertisement
Table of Contents
