Piston Assembly Removal - SRAM Guide RS Service Manual

P i s t o n A s s e m b l y R e m o v a l
Use a pick to remove the lever blade bushings from both sides of the
1
lever.
RS only: Use a T8 TORX® wrench to remove the SwingLink™ pivot
2
pinch bolt.
RS only: Use a T8 TORX® wrench to push out the SwingLink pivot pin.
3
The SwingLink will fall out easily.
Remove the SwingLink bushings from both sides of the lever.
4
T8 TORX wrench
T8 TORX wrench

Piston Assembly Removal

20