Putting The Dw 800 System Into Operation; Setting Up The Docking Station; Connecting The Docking Station To The Telephone - Sennheiser DW 800 Instructions For Use Manual

Basic settings

Putting the DW 800 system into operation

¿
¸
¶ º
10

Setting up the docking station

Move the hinged headset holder
position until a "click" is heard.
Move the hinged stand
·
certain resistance.
Move back the hinged stand
station tilts back slightly.
Connect the external mains unit to the DC IN
¸
socket
Charge the built-in rechargeable battery of the
mobile units (see "Charging the rechargeable
battery for the first time" on page 14).
Note:
For wall mounting the docking station, a wall
mount kit is available (see "Further information"
on page 28).

Connecting the docking station to the telephone

Unplug the telephone handset (including the cable)
from the telephone.
Plug the handset into the modular socket
return it to its place on the telephone.
Plug one of the modular plugs of the telephone
connecting cable to the modular socket to which
the handset was connected.
Plug the other modular plug of the telephone
connecting cable to the modular socket ¶.
¿
and to the mains.
·
to a vertical
until you overcome a
¿
so that the docking
º
and