Setting A Channel - Sennheiser Tourguide 2020-D Instruction Manual

Setting a channel

To set the complete system to a certain channel, proceed as follows:
Set the bodypack transmitter/radio microphone to the desired channel (see
next section)�
Set one of the receivers to the same channel (see „Setting the channel on the
receiver" on page 122)�
Automatically set all other receivers to the same channel using the channel
copy function (see „Setting the receiver channel(s) using the channel copy
function EZL 2020-20 L/L 2021-40" on page 123)�
Setting the channel on the bodypack transmitter/ radio micro-
phone
To set the bodypack transmitter or the radio microphone to the desired channel,
use the operating menu of the device� An overview of the operating menus is
given from page 134 onwards�
Make sure that the lock mode is deactivated (see „Activating/deactivating
the lock mode" on page 131)�
ON/OFF
Bodypack transmitter
Press the SET button�
The operating menu appears and the first menu item „CHAN" flashes on the
display�
Press the SET button�
The current channel flashes on the display�
▲ ▼
Press / to change the channel�
▲
If you press , the display jumps to the next channel; if you press
play jumps to the previous channel�
By pressing and holding the
(repeat function)�
LOW BATT
MUTE
PEAK
SET
▲ ▼
/ buttons, the display cycles continuously
Operation
SET
MUTE ON/OFF
Radio microphone
▼
Tourguide 2020-D | 121
, he dis-