Setting Up The Base Station; Connecting The Base Station To The Mains Power Supply - Sennheiser SD series Setup Manual

Setting up the base station

Setting up the base station
You can use the headset system with your fixed line phone and/or your
computer. The base station controls the wireless communication to the
headsets.
Place the base station at a minimum distance of 15 cm from the fixed
line phone.

Connecting the base station to the mains power supply

1 Connect the connector of the power supply unit to the
(marked yellow). Connect the power supply unit to a wall socket.
2 SD BS, SD BS ML: The Link LED
the Phone LED lights up white.
3 SD BS USB, SD BS USB ML,
Both the PC LED and the Phone LED
1
A C C
d s e t
H e a
P C
o n e
N
D C I
3 SD BS USB
SD BS USB ML
SD BS Phone
Disconnecting the base station from the mains power supply
If the product is not used for extended periods of time, unplug the
power supply unit from the wall socket.
lights up red. Either the PC LED
SD BS Phone: The Link LED
light up white.
2
SD BS
SD BS ML
SD Series – Setup Guide
DC IN socket
or
lights up red.
| 7