Connecting A Ptz Camera (M5100 Series) - FLIR M5104 Instruction Manual

21 Connecting a PTZ Camera
(M5100 Series)
You can connect PTZ cameras (not included) to the system. You can use FLIR MPX or
analog PTZ cameras with the system. FLIR MPX PTZ cameras can accept PTZ com-
mands directly through the video cable. FLIR MPX PTZ cameras do not require wiring for
RS485.
To connect a PTZ camera to the system:
1. Connect the camera video cable to one of the Video IN ports on the system. If you
have an MPX PTZ camera, it will automatically be detected and can be controlled by
the DVR.
If you have an analog PTZ camera, follow the steps below to set up the camera:
2. You can connect the RS485 wires for analog PTZ cameras to the AB ports on the rear
panel of the DVR. A is positive (+) and B is negative (-).
3. Right-click and click Main Menu. Enter the system user name (default: admin) and
your new, secure password if prompted.
4. Click >Setting>Pan/Tilt/Zoom.
5. Under Channel, select the channel your PTZ camera is connected to.
#LX400096; r.45547/45547; en-US
165