Table of Contents
Advertisement
19
Connecting a PTZ Camera
(LHV0000 Series)
You can connect PTZ cameras (not included) to the system. You can use Lorex 720p HD
and analog PTZ cameras with the system. Lorex PTZ cameras can accept PTZ com-
mands directly through the video cable. Lorex 720p HD PTZ cameras do not require wiring
for RS485.
To connect a PTZ camera to the system:
• Connect the camera video cable to one of the Video IN ports on the system. If you have
a 720p HD PTZ camera, it will automatically be detected and can be controlled by the
DVR.
If have an analog PTZ camera, connect the RS485 wires for analog PTZ cameras to
the AB ports on the rear panel of the DVR. A is positive (+) and B is negative (-).
1. BNC Video Cable: Used with all types of cameras.
2. RS485: Used with analog cameras only.
A (TX+)
B (TX-)
3. PTZ Camera
If you have an analog PTZ camera, you must follow the steps below to configure
the DVR to communicate with the camera:
1. Right-click and click Main Menu. Enter the system user name (default: admin) and
password (default: 000000) if prompted.
#LX400071; r.36874/36880; en-US
188
Advertisement
Table of Contents
