Upgrading Camera Firmware (Advanced) - FLIR M5104 Instruction Manual

15 Using the Main Menu
To configure cable type options:
1. From the Main Menu, click
2. For each channel, select the appropriate cable type option.
NOTE
It is recommended to select Auto, the default for MPX cameras. When Auto is selected, the system
automatically selects the camera format. Choose another analog cable type only if you are having
picture quality issues. Select IP to replace an analog channel with an IP camera channel, see 22
Connecting Cameras to the Local Area Network (LAN), page 169 for more information about using IP
cameras with the system.
3. Click OK to save changes. The system will restart.

15.1.9 Upgrading Camera Firmware (Advanced)

To manually upgrade camera firmware:
Manually upgrade IP camera firmware with a .bin firmware file saved to a USB flash drive
(not included). Typically, performing a manual camera firmware upgrade will not be neces-
sary unless directed to do so by technical support.
Prerequisites:
• Enable and connect at least one IP camera, see 22 Connecting Cameras to the Local
Area Network (LAN), page 169 for information about connecting IP cameras.
• Connect a USB flash drive with a compatible .bin camera firmware file saved to it to one
of the DVR's USB ports.
NOTE
Make sure the firmware file you are using is compatible with your IP camera model.
#LX400096; r.45547/45547; en-US
and select Cable Type.
52