Table of Contents
Advertisement
10
Setting The Time
CAUTION
It is highly recommended to set the date and time when first setting up your system.
Inaccurate time stamps may render your footage unusable for court evidence.
To set the date and time:
1. In the main viewing mode, right-click and click Main Menu.
2. Log in using the system user name (default: admin) and your new, secure password.
3. Click
and select Setting. Click General and select the Date&Time tab.
4. Under System Time, enter the current time and select your time zone. Then, click OK.
5. Check the DST check box to enable auto Daylight Savings Time updates.
NOTE
•
You can adjust the Start Time and End Time for Daylight Savings Time if the default settings do
not match your region.
•
Under DST Type, select Week to set the start and end time based on a day and week (e.g. 2nd
Sunday in March), or select Date to set the start and end time to a specific date.
6. (Optional) Check the NTP check box to sync your system with an Internet time server.
Click Manual Update to instantly update the time.
NOTE
•
Your system must have a constant connection to the Internet to use NTP.
•
(Advanced) You can enter a custom NTP server under Server and Port, and you can select how
often the system will sync the time using Interval.
7. Click Apply to save changes.
#LX400096; r.45547/45547; en-US
22
Hide quick links:
Advertisement
Table of Contents
