Connecting A Ptz Camera (Dnr400 Series) - FLIR DNR416P8 Instruction Manual

21 Connecting a PTZ Camera
(DNR400 Series)
You can connect PTZ cameras (not included) to the system. FLIR IP PTZ cameras can ac-
cept PTZ commands directly through the Ethernet cable or you can connect PTZ cameras
to the RS485 connectors on the back of the system.
To connect a FLIR PTZ camera to the system:
1. Connect the camera Ethernet cable to one of the PoE Ports on the system.
OR
Connect the camera to the local network (LAN) and then add it to the NVR. See 6.11
Connecting Cameras to the Local Area Network (LAN), page 12 for details.
2. Right-click and click Main Menu. Enter the system user name (default: admin) and
password (default: 000000) if prompted.
3. Click >Setting>Pan/Tilt/Zoom.
4. Under Channel, select the channel your PTZ camera is connected to.
5. Under PTZ Type, select Remote . This allows the system to control the PTZ functions
over the Ethernet cable.
6. Click OK. You can now control your PTZ camera using the system.
To connect a PTZ camera to the system via RS485:
1. Connect the camera Ethernet cable to one of the PoE Ports on the system.
OR
Connect the camera to the local network (LAN) and then add it to the NVR. See 6.11
Connecting Cameras to the Local Area Network (LAN), page 12 for details.
#LX400022; r. 1.0/16695/16698; en-US
164