Ptz Scan; Ptz Pan; Playback - FLIR M5104 Instruction Manual

17 Using FLIR Cloud™ Client for PC or Mac
3. Move the camera into the desired start position.
4. Click to start recording the pattern.
5. Move the camera to the desired end position. Then, click
pattern.
To run a pattern:
• Select the pattern number and click

17.3.4 PTZ Scan

Scan automatically cycles between a left and right point.
To set up scan mode:
1. Click to open the Advanced controls. Select Scan.
2. Move the camera to the desired left position and click
3. Move the camera to the desired right position and click
To run scan mode:
• Click .

17.3.5 PTZ Pan

Pan makes the camera continuously pan 360°.
To run Pan mode:
1. Click to open the Advanced controls. Select Pan.
2. Click .

17.4 Playback

You can use Playback mode to playback video saved on systems connected to the client.
To access Playback mode:
• Click and then click
#LX400096; r.45547/45547; en-US
.
to create a Playback tab.
to stop recording the
.
.
101