Storage; Configuring The Video Recording Schedule - FLIR M5104 Instruction Manual

15 Using the Main Menu
To configure network warnings:
1. From the Main Menu, click
2. Under Event Type, select the event type you would like to configure.
• Net Disconnection: The system has lost connection to the network.
• IP Conflict: More than one device on your network has the same IP address.
• MAC Conflict: More than one device on your network has the same MAC address.
• All: Configure responses for all network events.
3. Configure the following for the selected event type:
• Enable: Check to enable the selected event type.
• Show Message: Check to show a popup message when the selected event occurs.
• Send Email: Check to enable email alerts. You must configure email alerts before
you will be able to receive them (see 15.3.5 Configuring Email Alerts, page 65).
• Buzzer: Check to activate the system buzzer.
• Post_REC: Enter the number of seconds the system will record after network loss
occurs.
4. Click OK to save changes.

15.3.12 Storage

The Storage menu allows you to configure the recording schedule and hard drives con-
nected to the system.

15.3.13 Configuring the Video Recording Schedule

You can set a custom recording schedule according to your needs. For example, you can
set the system to record continuously during business hours and record on motion detec-
tion only outside of business hours.
A custom recording schedule helps reduce the amount of hard drive space required, in-
creasing the time your system can retain recordings.
#LX400096; r.45547/45547; en-US
and then click Event>Warning>Network.
76