Table of Contents
Advertisement
Remote Initial Program Load Setup
This option allows you to enable and set up the remote startup of your system or
partition. You must first specify the network parameters as shown in the following
screen:
Network Parameters
1. IP Parameters
2. Adapter Parameters
3. Ping
===>
Note: Some applications may require that IP addresses contain leading zeroes for
Eserver pSeries 670 User's Guide
62
numbers less than 100. For example, 129.132.4.20 may need to be entered as
129.132.004.020.
.------.
|X=Exit|
`------'
Advertisement
Table of Contents
