Table of Contents
Advertisement
Download Microcode to PCI SCSI RAID Adapter
The command syntax for a PCI SCSI RAID Adapter is as follows:
diag -c -d RAID adapterName -T "download [-B] [-D] [-P]"
Flag
-B
-D
-P
Download Microcode to Disk Drive Attached to a PCI SCSI RAID Adapter
The command syntax for a disk drive attached to a PCI SCSI RAID Adapter is as
follows:
diag -c -d RAID adapterName -T "download {-l chID | -A} [-D] [-P]"
Flag
-A
-D
-l
-P
Download Microcode to a PCI FC-AL Adapter
The command syntax for a PCI FC-AL Adapter is as follows:
diag -c -d device_name -T "download [-s {diskette|disk}] [-f] [-l
{latest|previous}]"
Flag
-d
-f
-l
-s
The microcode image file must be located in the /etc/microcode directory.
Download Microcode to DVD-RAM Attached to a PCI SCSI Adapter
The command syntax for a DVD-RAM attached to a PCI SCSI Adapter is as follows:
diag [-c] -d cdX -T "download [-s {/etc/microcode|diskette}]
Flag
-c
-cdX
Description
Download boot block microcode (default to functional microcode)
Microcode is on diskette (default to /etc/microcode directory)
Download the previous level of microcode (default to latest level)
Description
All disk drives
Microcode is on diskette (default to /etc/microcode directory)
RAID disk drive-physical disk channel/ID (example 27)
Download the previous level of microcode (default to latest level)
Description
Device name is the name of the adapter.
Force the download even if the current level of microcode is not on the media.
Level of microcode to download. The default is latest.
Source of the new microcode. The default value is disk.
Description
No console mode. Run without user interaction.
Device selected.
Chapter 6. Introducing Tasks and Service Aids
99
Advertisement
Table of Contents
