Table of Contents
Advertisement
-o
-s mmddyy
-a
-r
Display Resource Attributes
This task displays the Customized Device Attributes associated with a selected
resource. This task is similar to running the lsattr -E -l resource command.
Display Service Hints
This service aid reads and displays the information in the CEREADME file from the
diagnostics media. This file contains information that is not contained in the publications
for this version of the diagnostics. The file also contains information about using this
particular version of diagnostics.
Use the arrow keys to scroll through the information in the file.
Display Software Product Data
This task uses SMIT to display information about the installed software and provides
the following functions:
v List Installed Software
v List Applied but Not Committed Software Updates
v Show Software Installation History
v Show Fix (APAR) Installation Status
v List Fileset Requisites
v List Fileset Dependents
v List Files Included in a Fileset
v List File Owner by Fileset
Display System Environmental Sensors
This service aid displays the environmental sensors implemented on a CHRP system.
The information displayed is the sensor name, physical location code, literal value of
the sensor status, and the literal value of the sensor reading.
The sensor status can be any one of the following:
v Normal – The sensor reading is within the normal operating range.
v Critical High – The sensor reading indicates a serious problem with the device. Run
diagnostics on sysplanar0 to determine what repair action is needed.
Eserver pSeries 670 User's Guide
96
Displays the last diagnostic results file stored in the
/etc/lpp/diagnostics/data directory
Displays all diagnostic result files logged since the date specified
Displays the long version of the Diagnostic Event Log
Displays the short version of the Diagnostic Event Log
Advertisement
Table of Contents
