Password Utilities - IBM Eserver pSeries 670 User Manual

Password Utilities

Note: This utility is disabled in partitioned systems.
Entering this selection permits access to the options shown on the following screen:
Password Utilities
1 Set Privileged-Access Password
2 Remove Privileged-Access Password
3 Unattended Start Mode <ON>
===>
Set Privileged-Access Password: The privileged-access password protects against
the unauthorized starting of the system programs. When this option is selected, another
screen displays that allows the setting of a password.
You can set the password from either the service processor or system management
services menus. After the password is set, both the service processor and system
management services automatically use the same password. The password is limited to
eight characters.
Remove Privileged-Access Password: If you previously had set a privileged-access
password and want to remove it, select Remove Privileged-Access Password.
Unattended Start Mode <ON>: This selection is used to enable or disable unattended
start mode. Use this option to instruct the service processor to restore the power-state
of the server after a temporary power failure, which is necessary on servers that require
automatic power-on after a power failure. The default setting is on.
Eserver pSeries 670 User's Guide
60
.------.
|X=Exit|
`------'