Download Microcode To Disk Attached To Pci Scsi Adapter; Download Microcode To Other Devices - IBM Eserver pSeries 670 User Manual

-s

Download Microcode to Disk attached to PCI SCSI adapter

The command syntax for a disk drive attached to a PCI SCSI adapter is as follows:
diag [-c] -d hdiskX -T "download [-s {/etc/microcode|diskette}] [-l
{latest|previous}] [-f]"
Flag
-c
-d hdiskX
-T download
-s
-l
-f

Download Microcode to Other Devices

The command syntax is as follows:
diag -c -d device_name -T "download [-s diskette] [-l previous] [-F]"
Flag
-F
-l
-s
Eserver pSeries 670 User's Guide
100
Source of microcode image. The /etc/microcode directory is the default.
Description
No console mode. Run without user interaction.
Selected device (for example, hdisk0).
Download microcode task.
Source of microcode image. The /etc/microcode directory is the default.
Level of microcode image to be installed. The default is latest.
Install the microcode on the disk even if the current level is unavailable on the
source.
Description
Force flag. Required to download microcode if the current level is unavailable
on the source.
Microcode level. The default is latest.
Source of the new microcode. The default is the /etc/microcode directory.
Default value is disk.