Add Resource To Resource List; Aix Shell Prompt - IBM Eserver pSeries 670 User Manual

v Local Area Network Analyzer
v Log Repair Action
v Periodic Diagnostics
v PCI RAID Physical Disk Identify
v Process Supplemental Media
v Run Diagnostics
v Run Error Log Analysis
v Run Exercisers
v Save or Restore Hardware Management Policies
v SCSI Bus Analyzer
v SCSI Tape Drive Service Aid
v Spare Sector Availability
v SSA Service Aid
v Update Disk-Based Diagnostics
v Update System or Service Processor Flash
v 7318 Serial Communication Network Server

Add Resource to Resource List

Use this task to add resources back to the resource list.
Note: Only resources that were previously detected by the diagnostics and deleted

AIX Shell Prompt

Note: Use this service aid in Online Service Mode only.
This service aid allows access to the AIX command line. To use this service aid, the
user must know the root password (when a root password has been established).
Note: Do not use this task to install code or to change the configuration of the system.
from the Diagnostic Test List are listed. If no resources are available to be
added, then none are listed.
This task is intended to view files, configuration records, and data. Using this
service aid to change the system configuration or install code can produce
unexplained system problems after exiting the diagnostics.
Chapter 6. Introducing Tasks and Service Aids
85