GSSI StructureScan Mini XT Manual page 53

Geophysical Survey Systems, Inc.
• Ground Truth: This will allow you to click on a target and enter the KNOWN DEPTH of that
target. This will adjust the scale accordingly. To use, click "Ground Truth" than use your mouse
cursor to left-click on something in the data. Usually this will be an embedded object, but a layer
such as back of slab works also. A box will then pop up and you will enter in the known depth to
that object.
Display Options
Color Tables: Change the color of your data.
Color Xforms: Change how the colors of your chosen color table are distributed.
Display Gain: Change the contrast (brightness) of your data. This changes the display only; it does not
change the actual data.
Targets: Turn the display of the targets (dots) on or off.
Export 2D
Targets: Export targets (dots) information (distance, depth) to a comma delimited ASCII file. The name
of the file is FileName+X.csv located in the output folder.
JPEG: Save the current file as a JPEG file (Picture File). This file will be named FileName+X.jpg located
in the output folder.
Excel: Create a report in Microsoft Excel with user entered information, data information and a picture of
the 3D Grid.
a)
Enter information if needed. Click on OK
when done.
b)
Open the Excel by clicking at the bottom of
the screen if it did not automatically open.
c)
In Excel move the picture and adjust the size
of the picture as needed.
d)
Print the report.
MN 70-813 Rev E 41
StructureScan™ Mini XT
Manual