Processing The Data - GSSI StructureScan Mini XT Manual

Geophysical Survey Systems, Inc.

Processing the Data

Initial Process (automatically done by the software)
Once a file is opened, the software will automatically process the original, raw data and create a new
processed file so that it is viewable. The process done was Time Zero correction, Filtering, and Focus
(Migration).
•
If you have configured Auto Save File set as Yes, the software will process the original file,
save the processed file to the Output folder, and name the new file as FileName+Processed+X,
where X represents the number of times the original file was opened and processed.
•
If you have configured Auto Save file set as No, the software will process the file, however will ask
you to save the processed file.
•
You may save the file using the software's naming style.
•
Or you may rename the file to your style and save the file.
•
In either case, the processed file will be saved to the folder you indicated as the Output Directory.
•
The original file still exists in the Source folder. This file remains untouched.
•
Note the tabs (orange circle), these display the name of the file being displayed.
MN 70-813 Rev E 36
StructureScan™ Mini XT
Manual