H
Hang Up
This command instructs the terminal to disconnect from the remote device
terminating any session in progress.
Default:
Command values:
O
Return to On line state
This command instructs the terminal to return to
CONNECT or CONNECT text result code.
Default:
Command values:
+++ Enter On line command state
If the terminal detects the „+++‟ escape sequence in
will enter online command state.
Default:
Command values:
NTC-6000 Series V.250 Manual
To suit software version 1.1.0
N/A
Storage:
N/A
N/A
N/A
Storage:
N/A
N/A
N/A
Storage:
N/A
N/A
Page 19 of 32
7/21/2010
online data state
and issue a
online data state
the terminal