Siemens 3VA1 100 A Manual page 506

Appendix
A.1 Standards and approvals
Standard
IEC / EN 60947-2, An-
nex H
IEC / EN 60947-3 /
DIN EN 60947-3
(VDE 0660-107)
IEC 60947-4-1 /
DIN EN 60947-4-1
(VDE 0660-102)
IEC / EN 61000-4-2
IEC / EN 61000-4-3
IEC / EN 61000-4-4
IEC / EN 61000-4-5
IEC / EN 61000-4-6
IEC 61557-12
UL489 Annex SE
3VA molded case circuit breakers conform to the following national standards
Please go to (http://www.siemens.com/3VA-Documentation) for a list of national standards to
which 3VA molded case circuit breakers conform.
Certification by marine classification societies
Please go to (http://www.siemens.com/3VA-Documentation) for a list of marine classification
societies which have certified 3VA molded case circuit breakers.
506
Title
"Test sequence for circuit-breakers for IT systems"
"Circuit-breakers for IT systems"
Low-voltage switchgear and controlgear – Switches, disconnectors,
switch-disconnectors and fuse-combination units
Low-voltage switchgear and controlgear: Contactors and motor-starters
Electrostatic discharge immunity test
Radiated, radio-frequency, electromagnetic field immunity test
Electrical fast transient/burst immunity test
Surge immunity test
Immunity to conducted disturbances, induced by radio-frequency fields
Electrical safety in low voltage distribution systems up to 1000 V a.c. and
1500 V d.c. - Equipment for testing, measuring or monitoring of protective
measures - Part 12: Performance measuring and monitoring devices
(PMD)
"Firmware analysis for safety-relevant applications in electronic trip units"
RoHS Directive 2002/95/EC (Directive on the restriction of the use of
certain hazardous substances in electrical and electronic equipment).
3VA molded case circuit breakers
Manual, 04/2015, A5E03603177010-02