Resetting the molded case circuit breaker
If the 3VA molded case circuit breaker has tripped, the LED labeled "TRIP" lights up
①
The method by which the 3VA molded case circuit breaker is reset by the motor operator
depends on the selected reset mode.
Reset modes
The reset mode can be selected. After the molded case circuit breaker has tripped, the
selected reset mode determines the response of the motor operator in the TRIP position.
Motor operator response to tripping of the 3VA molded case circuit breaker depending on the
reset mode selection:
3VA molded case circuit breakers
Manual, 04/2015, A5E03603177010-02
Reset mode setting
Accessories
4.6 Motor operators
265