Siemens 3VA1 100 A Manual page 309

Sealable protective covers of the residual current device
①
②
③
Transparent protective cover over setting buttons
In order to prevent unauthorized access to the setting buttons for I
cover over the settings buttons can be optionally sealed.
Contact hazard protective cover over main current paths including sealing option
After the residual current device RCD310 or RCD510 has been mounted on the 3VA1
molded case circuit breaker or 3VA1 switch disconnector, a contact hazard protective cover
is installed over the main current paths to protect against direct contact. This cover can be
sealed optionally in order to block any attempt to dismantle the residual current device from
the molded case circuit breaker/switch disconnector.
3VA molded case circuit breakers
Manual, 04/2015, A5E03603177010-02
Contact hazard protective cover over auxiliary contacts
Transparent protective cover over setting buttons
Contact hazard protective cover over main current paths
Accessories
4.8 Residual current devices
and Δt, the transparent
Δn
309